Technology/Case Studies
Dispensing Technology
1. With extensive experience in industry applications, Nordson (USA), Musashi (Japan), Sheugenpflug (Germany), Second (China), Axxon (China), and Mingsend (China) are our frequently used partners in fluid processing.
2. Common Cases
Time-Pressure Syringe Dispensing
Parameters: Minimum dispensing volume 0.003 ml, frequency 680 strokes/min, applicable liquid viscosity 1–100 kcps – Auger Valve
Parameters: Glue dispensing rate: 0.0001–0.2 ml/s; glue dispensing pressure: 18 kg/cm². 2 Applicable liquid viscosity: 30k–1300k cps
Jetting Technology
Parameters: Single-point dosage 0.05 mg, 150 pcs/s, minimum glue dot diameter 0.150 mm, applicable liquid viscosity 0–200,000 cps.
Gear pump dispensing adhesive
Key features: Large-area, seamless coating application; equipped with a rotating needle (optional) for use on sharp-angle contours; stable encapsulation volume achieved through feed port pressure monitoring.
Vacuum potting
In a vacuum environment, potting ensures that there is no air inside the product. The minimum potting volume is 0.01 g, with a potting accuracy of ±1.5%.
Jet dispensing
Screw valve
Vacuum potting
Contact Information
Phone:+86 (573) 8911 8800
Fax: +86 (573) 8477 8884
Email:china@tanac.com.cn
Address: No. 398, Xinjing Road, Yaozhuang Town, Jiashan County, Zhejiang Province
